No one wants to get in a car accident, especially in their own garage! And who wants one of those tacky tennis balls hanging from the middle of the garage all the time? Surprisingly parking sensors aren’t very expensive, but then it’s easy to question their quality. We’ll break down the benefits, and provide you our pick so that you can decide if they are worth your money.
Parking sensors provide visibility, better parking, and avoid potential damage. It’s a relatively small investment that prevents hitting the back of your garage or even someone getting hurt. Preventing hundreds to thousands of dollars in repairs. They save time, money, stress, and are worth buying.
Throughout this article, you’ll also learn the following information about parking sensors:
Parking sensors are becoming more common in modern homes. Some of them come equipped with sensors already, but if yours doesn’t, then you’re probably wondering if you’d benefit from getting one.
Here’s a quick list of five reasons that you should consider installing a parking sensor in your garage:
Now that you’ve heard the main reasons parking sensors are useful, you’re probably wondering which one you should get, especially since the price range is between $16 and $200.
The STKR Concepts Garage Parking Sensor is currently the best parking sensor for the price. It has a plethora of notable features, making it a high-end pick for any homeowner without having to pay an arm or a leg as it comes in it right at $29.99.
Review the list of perks that you’ll get with this garage parking sensor below.
It’s very easy to picture the most common use of being able to pull a vehicle into your garage exactly where you want it. However, the technology behind this parking sensor makes it a very versatile tool.
In a shop full of cars that are currently being worked on, the easiest way to make more room, (especially if the vehicle doesn’t run), might be to use four-wheel dollies under each tire so that you can push the car sideways over to the wall.
Car dollies might be how you slide your old Camaro project car around the shop when you need more space. Or maybe you sell cars and this is how you arrange your indoor showroom.
Well if you have a very inexpensive tool like this garage parking sensor then you've got another set of eyes to let you know if you've pushed the car close enough to where you want it. That also applies for just about any other heavy objects you're moving around for that matter.
Another scenario that requires communication from two points is when someone is pulling a vehicle onto a Dynamometer (or dyno for short). It's that machine that they ask you to pull onto when you're getting your emissions test done that has the metal rollers in the floor that you gently park your vehicle's wheels on. Many businesses have specialized equipment like this and could use a handy distance sensor.
If you have a trailer that you have to park in the same spot repeatedly like on the side of your house or in a specific parking area, then there's another opportunity for this device to help gauge distance and it gives you direct feedback on how close you're getting.
Another scenario that could help keep people safe is to use something like this in a factory setting where there is a lot of forklift work as it could be set at a high traffic corner or intersection and the sensor could actually be pointed into the intersection or around the corner preventing a possible collision.
These are just a few of the examples where an amazing sensor like this could be used. And because they're so affordable, the scenarios are endless if you bought multiple. For multiple parking spaces, multiple walls, toy-haulers, and even enclosed trailers.
Although you’re well-educated on the perks of this garage parking sensor, there are a few other specs that you should consider. Parking sensors shouldn’t be too complicated or difficult to work with. Fortunately, that’s exactly what this Garage Parking Sensor offers.
Most of the time when installing a parking sensor, it usually requires all sorts of drills, pilot holes, screws, and other supplies. However, with this sensor, it comes with everything you’ll need and is very simple to install. Making it easy, temporary if and when you need it. Provided in this kit are strong double-sided tape and durable velcro strips.
Rest assured, once you install the parking sensor, it’s not going anywhere. It’s tried and tested and proven long-lasting. To its contrary, it's also incredibly convenient in its ability to allow you to easily remove it, and reposition it to a new location. All you have to do is take off the velcro patch, move it somewhere else, and reinstall the sensor. There’s no need for countless holes or painted patches all over the place.
It’s very easy to keep this sensor powered. Not only does it consume barely any energy compared to most other models, but you’ll have two power methods at your disposal.
The first method uses a USB cable to power the sensor. Plug any typical cell phone USB cable into the micro USB port on the sensor. These cables are so common these days that most households have several unused cables stored in a drawer somewhere.
The second method of charging the garage parking sensor is by using AA batteries. Each unit uses four batteries, which will last for many months before they need to be replaced.
Between the octagon-shaped traffic light and the smaller round sensor is a 3’ cable. This allows you to position the sensor right around the height of your bumper and still be able to mount the traffic light high enough that it’s visible to the driver.
There’s a timer that starts every time the sensor shines an LED light. This walkway light is designed to illuminate your path in the garage, making it easier for you to see everything as you’re walking into your house. It lasts for two minutes, which is more than enough to allow you to get inside before it turns off.
One of the most notable specs of all is that this device barely takes up any space in your garage. From the compact 4.7-inch x 3.5-inch display down the three-foot cable to a tiny little sensor, nothing on this system is cluttered.
It’s quite impressive to think that it can help stop car accidents without taking up more room than anything else in the garage. Most other sensors sit on the floor like a pole or hang from the middle of the ceiling, both taking up vital garage space or adding another obstacle to dodge. However, that’s not the case with STKR’s Garage Parking Sensor.
If you’re still on the fence about getting a parking sensor, then you should probably know what you’re looking for before you get one. After all, it’s not a big investment, but it is something that you have to install in your home.
Read these considerations before getting a garage parking sensor:
If you want to know why the Garage Parking Sensor by STKR Concepts is better than the average garage sensor, then read on.
Why is it that so many customers prefer this setup over any other? You’ll find out all of the reasons below.
No need for complicated ceiling mounts like tennis balls and lasers. Nothing mounts to the floor creating a trip hazard in your garage. The STKR Garage Parking Sensor mounts in minutes and is never in the way.
You can move the sensor wherever you want in your garage, set the sensitivity, and adjust how wide of a range it covers. It’s more adjustable than you’ll find in competing brands, making it better for people of all driving experience levels.
Since it’s an LED bulb, you can expect thousands of hours of bright light that you wouldn’t get with incandescent or fluorescent bulbs. LEDs are the current leader in the market, which is why STKR Concepts uses them.
Most parking lights have a solid red light that blinks when you’re getting too close. While this setup might work for some people, those with troubled vision might have problems noticing the difference at night. Fortunately, this light has red, yellow, and green lights, just as you’d see in a traffic light.
Something else to add is that you need to make sure the sensors light indicators are big enough to see. Some lights are pretty small which might make it harder to see if you are getting too close. Verses STKR’s is small enough to not clutter up your wall but still big enough to see each color clearly.
Rather than having to drill pilot holes and put screws in the wall, you only have to use the included velcro and double-sided tape. Not only does this make it quicker and easier to install, but it also means that you don’t have to hire a professional.
Many parking sensors require a 12V plug-in or some sort of combination of batteries. However, you’ll be able to choose either four AA batteries or a USB cable with this model. There’s no need to settle for one of them if you’re offered the convenience of both!
There are many other reasons that so many people choose this Garage Parking Sensor over the vast majority of parking aids out there. Despite the fact that you’ll get all of these sought after features, it’s much more affordable than almost any other parking sensor that you’ll come across.
Parking spaces and effective lighting do not always come hand in hand. Most garages, shops, and covering parking areas could always use more light.
STKR also makes two garage lighting systems that screw directly into an empty light bulb socket. Check out the MPI and the TRiLIGHT to give your garage a huge lighting boost to make it easier to see where you're parking.
Parking sensors are well worth buying for everyone who has a garage or tight space. Even if you’re an expert driver, it gets rid of the guesswork saving time and can come in handy for friends, family and guests. Think of it as just another tool you use to make your life easier.
Here’s a quick recap of the post:
Comments will be approved before showing up.
Why do your gloves smell so bad?
Trapped sweat grows bacteria that breaks down proteins, carbohydrates, fatty acids, and leaves behind smelly chemicals like ammonia and urea. Worse yet, this bacteria could cause infection and rashes. The solution: Gym Skins by STKR Concepts are hand protection that doesn’t grow smelly bacteria.