Have a Question? Look here
Can I place orders outside of the United States?
Thank you for your interest in purchasing from STKR.
For orders in Europe please visit eu.stkrconcepts.com
For orders in Canada please visit ca.stkrconcepts.com
For all other international locations please contact us
How can I track my order?
Your tracking number will appear on the order status page in your account.
Please contact us if you need further assistance
How long should it take to receive my order?
It takes up to 2 business days to process your order and shipping can take up to 7-10 business days, for orders within the United States.
To find out about the status of your order, go to the order status page in your account or contact us
How do I cancel my order?
There is a limited time to cancel your order. Please contact our customer service team with your request to cancel during regular business hours, (8am-5pm ET).
If your order has been processed through our fulfillment system you will need to wait and return the order.
Do you ship outside of the USA?
Yes! In order for us to get you the best shipping rate, please call +1-704-508-1031 or email info@stkrconcepts.com
Orders shipping to Europe please visit: eu.stkrconcepts.com
How do I get free shipping?
Qualifying U.S. orders of $99 or more are eligible for free shipping
If an item is backordered, will the rest of my order ship?
Yes. All items that are available will ship immediately.
Any items that are backordered will ship as soon as we receive them in our warehouse.
When will my backordered item ship?
Items on backorder will ship once we receive them in our warehouse.
What is a Lumen?
A Lumen specification is the measurement of the overall light output. A Lumen rating is the average brightness and intensity in all directions. Generally, Lumens are referred to as the total amount of light emitted from the LED as measured in an integrating sphere.
STKR® with Lumen Tech LEDs rates each product's overall light output, or brightness, in Lumens.
For more information about lumens, check out our article titled "How Many Lumens Do You Need for a Work Light?"
What are Lumen Tech LEDs?
Not all Light Emitting Diodes (LEDs) are created equal. At STKR® we use Lumen Tech LEDs in all our products. Lumen Tech™s daylight white LEDs combine the most intense light output in combination with a wide viewing angle. This provides STKR products with a crisp bright white light that illuminates a large surface area making STKR the most versatile task lights.
Lumen Tech LEDs for STKR products have been developed to deliver the best technical performance.
STKR products have been designed and engineered to deliver to our professional customers innovation, technology, and the best functionality.
Are more LEDs better?
Competitors tend to win over their customers with sheer amount of low-grade LEDs in their products. More LEDs are not better when inferior LEDs are being used. Did you know that more LEDs use more power and drain batteries more quickly?
Inferior LEDs often claim big millicandela (typically listed as MCD) specification numbers, but MCDs specifications are only half the story. The true total brightness of a task light takes into account the viewing angle of the LED. Inferior LEDs produce a very focused small light dot on the work surface or area, even when using over 20 LEDs. This is not the type of LED that should be used in a task light, that is why Striker only uses Lumen Tech LEDs.
High-quality Lumen Tech LEDs are a combination of light intensity and a wide viewing angle.
My EZ Home Security Solar Gutter Light does not turn on
It may not be getting enough charge. Make sure unit is installed where it can get maximum sun exposure for 8 hours.
It may be switched to the OFF position. Move the switch to the "ON" position.
The unit could be located near a strong light source. Make sure unit is installed away from any strong light sources, such as an existing outdoor light. Sunlight sensor is built into the solar panel, avoid strong light hitting solar panel.
Unit not efficient under trees. Move the unit to another open location.
The Solar panel could be dirty, or covered up. Wipe the solar panel clean and make sure it is always free of debris.
Do you have an Initial Startup Guide for the FLi OVER-LANDER?
Wireless Remote won't turn on the FLi OVER-LANDER Light
- Ensure the flashlight battery is charged.
- If the light has not been used in 12 hours or longer, Use the main flashlight power button to turn the light on. Then the wireless remote will continue to work.
- Change the battery in the wireless remote with a new CR2032 Coin Cell 3V Lithium Battery
- Check the battery area to make sure there is not a battery isolator as shown in this video.
My FLi-Pro flashlight is charged but will not turn on.
Be sure to unscrew the flashlight in the middle and connect the battery. Here is a picture reference.
Wireless Remote won't turn on FLi-Pro Light
- Ensure the flashlight battery is charged.
- If the light has not been used in 12 hours or longer, Use the main flashlight power button to turn the light on. Then the wireless remote will continue to work.
- Change the battery in the wireless remote with a new CR2032 Coin Cell 3V Lithium Battery
Do you sell replacement chargers for the TRi-Mobile?
If you bought your TRi-Mobile between 2022 and 2023 they your TRi-Mobile takes a special round DC jack. We can probably help you with that the easiest by emailing us at info@stkrconcepts.com or calling us at 704-508-1031.
If you purchased yours in 2024 and beyond then you should now have a TRi-Mobile that use a USB-C power cord. You can get one of these just about anywhere cell phone accessories are sold. You can also purchase one from us directly here: USB-C power adaptor with cable
Can the MPI be placed on a dimmable outlet or light switch?
The MPI does not have a dimmable feature and cannot be placed on a dimmable outlet.
Can the TriLight be placed on a dimmable outlet or light switch?
The TriLight does not have a dimmable feature and cannot be placed on a dimmable outlet.
Why is the TriLight not turning on?
Make sure the outlet is receiving power (this may be as simple as turning on the switch that controls the outlet)
What type of light socket does the TRiLIGHT or MPI screw into?
E26 medium base. Typically found in garage and utility rooms
Is there an international version of the TRiLIGHTfor 220-240V?
Yes, please contact us to order or find a dealer in your country for the 220-240V version of the TRiLIGHT
Can I change the motion sensitivity on the TRiLIGHT?
Yes, As of June 2020, the motion sensor sensitivity can be adjusted. To fine-tune the sensitivity, simply turn the Motion Sensor Sensitivity dial to the desired level.
Can the motion sensor be turned off?
Yes. Turn the motion sensor sensitivity dial counterclockwise to OFF
Can I use the TRiLIGHT outside?
The TRiLIGHT is rated for dry locations only. It can be used in a carport as long as the elements cannot reach the light
How to turn the Headlamp 6.5 Pro on and off?
Make sure the internal kill switch is switched to the right before turning it on, blue interior lights will illuminate. Then press the triangle or circle buttons found at your right temple.
How do you change the brightness setting on the Headlamp 6.5 Pro?
The triangle and circle buttons found at your right temple. Pushing and holding them will cycle the light through its brightness setting. Let go when you get to your desired brightness.
On a Headlamp 6.5 Pro, how do you turn on the red lights?
On the battery pack found at the back of your head when wearing this headlamp there is a button that turns on/changes modes for the red light setting.
How do I turn off the FLEXIT Headlamp 2.5?
Press & HOLD the red power/mode button located on the battery case
When does the Headlamp 2.5's Rear Red Light turn on ?
The rear red light turns on when the front lights are on. The rear red-light flashes during the Hazard mode.
How many modes does the Headlamp 2.5 have?
There are five (5) modes.
- High Spot/High Flood
- High Spot
- Medium Spot/High Flood
- Low Spot/High Flood
- High Spot/Flashing Flood & Rear Red
How long does the Mobile Task Light hold a charge on High/Low?
The Mobile Task Light will operate on high blinding you with 1200 lumens of light for approx. 1.25 hrs.
If you need longer run times mellow the Mobile Task Light out with the Low mode. Don't let the word "Low" deceive you. The Mobile Task Light is never truly mellow. Low still burns retinas with 300 lumens for approx. 7.5 hrs!
Run times are dependent on the outside ambient temperature (yep, temps affect LEDs).
Does the Mobile Task Light go dim when the battery is low?
The Mobile Task Light is designed to run at full brightness until the Lithium battery falls below operating levels. This ensures you get full brightness the entire time it is running, unlike entry-level flashlights that only operate at full brightness for a few minutes, then slowly dim to nothing.
How many lumens does the Mobile Task Light emit on High/Low?
Put on your sunglasses when you turn The Mobile Task Light on HIGH as it will be tossing 1200 lumens into your eye holes! For those of you who aren't impressed by the word lumens and twelve hundreds of them, just go stare at the sun...it’s kind of like that (please don't really do that). Low is a romantic 300 lumens. Get ready to Netflix and chill... Wait no! 300 lumens is still crazy bright. Most flashlights are well below that. We designed The Mobile Task Light Low setting to produce 300 lumens. Are we crazy...or are we bright? It is up to you to decide. Please be kind :)
How long does it take the Mobile Task Light to charge?
The Mobile Task Light will take approx. 4 hrs. to charge from 0% battery to 100% battery with a 2 amp USB charger. 2 amps is the max we recommend feeding the Mobile Task Light. A charger block, computer, laptop, car charger, etc. with less amps will work fine but take a little longer.
Can the Mobile Task Light be used while charging?
Give the Mobile Task Light a tail by plugging in that USB cable and feed him/her (you determine your Mobile Task Light's sex when you get it). If you need longer run times, just plug the Mobile Task Light into a USB charger. Performance, when plugged in, varies due to the different amp outputs of different chargers. 2-amp chargers are the max you should feed the Mobile Task Light.
Is the Mobile Task Light waterproof?
The Mobile Task Light loves long walks on the beach, even if it is raining...just don't take it swimming. It never was much for the doggy paddle, plus it will die a sad drowning death. The Mobile Task Light has a waterproof rating of IP65, which means it is water resistant, but not totally waterproof. If using in wet conditions, just be sure to keep the USB charging plug well sealed, and whatever you do, DON'T plug it in (or use it plugged in) while wet or raining. The brightness of the Mobile Task Light is shocking, but that is the only part we want to be doing the shocking.
Can I change the Mobile Task Light batteries?
The Mobile Task Light is powered by hard-wired dual-lithium batteries. Although Lithium batteries are wonderful and last a long time, all lithium batteries get tired of charging and discharging eventually. For those who nerd out on batteries, there are 2 2000 mAh 18650 hard-wired in parallel. If that means anything to you then yes, when the batteries start to get tired of charging and discharging, then you can perform open heart surgery on your Mobile Task Light and solder in some fresh 18650s (don't exceed 2000mAh). For those of you who aren't so impressed by battery talk, you shouldn't need to worry about this. Just be sure and charge or discharge (use the light) your Mobile Task Light at least every 6 months to prolong the life of your batteries.
Why won't my Magnetic Light Mine turn on?
The switch on the Light Mine can stick when first being used, so I would first like to make sure that you have it completely pushed over to the “ON” side. Sometimes the switch needs to be pushed over hard, using the butt of your thumb. The switch can click once but needs to click over a little farther to stay on.
Can I change the batteries for the Magnetic Light Mine?
While it is possible to change the batteries in the Magnetic Light Mine, please be very careful. Replacing the batteries does run the possibility of damaging the whole unit. Although, if done with care, there should not be an issue.
Pressing on the locking tabs with a flat-head screwdriver will open the body. Pressing too hard will snap/break the locking tab and/or tab receiver, this is the difficult part so be very careful.
The batteries are LR44 alkaline. Silver oxide equivalents (SR44) can be used but do not mix alkaline batteries with silver oxide batteries. (Silver Oxide batteries will last longer but the initial brightness of the LED will be less) When removing the batteries, you will notice they are shrink-wrapped. Your replacement batteries will need to be isolated as well. Clear packaging or electrical tape works well, just leave the ends exposed for the electrical contacts. (Please dispose of batteries properly). Here is a diagram.
Can I change the batteries in the Light Mine Pro?
Yes. Replace with 3 AAA alkaline batteries
What are the run times for the BAMFF tactical flashlights?
- B.A.M.F.F. 2.0 - 4hrs on High and 15hrs on Low
- B.A.M.F.F. 4.0 - 2hrs on High and 15hrs on Low
- B.A.M.F.F. 4.0XL - 2hrs 45mins on High and 20hrs on Low
- B.A.M.F.F. 6.0 - 1hr 45mins on High and 14hrs on Low
- B.A.M.F.F. 8.0 - 1hr 45mins on High and 16hrs on Low
- B.A.M.F.F. 10.0 - 2hrs 30mins on High and 7hrs on Low
My tail switch isn't working on my BAMFF tactical flashlight
Make sure the lock rings are tightened down all the way.
Inside the switch is a small aluminum lock ring with two small holes used for tightening the lock ring. If this ring is not tightened down completely the switch may not work consistently or even at all. We suggest using a ballpoint pen, a paper clip, or other small pointed utensil to tighten this ring, twisting the ring clockwise until it is tightened and no longer moves. This should correct the issue and allow the switch to operate properly. Image 1 & Image 2
Why is my parking sensor not detecting my car when I pull in and out of my garage?
Be sure there are no obstructions to either side of the bottom sensor on your unit. The sonic pulses come out in a cone shape and could be catching a surrounding object to focus on instead of the vehicle. Ultra-sonic image
How long should my parking sensor batteries last?
With typical use (twice a day) they should last 4-5 months.
How do I reset my distance on my garage parking sensor?
Park your car in the desired location, press and hold the red “set distance” button for 5 seconds and once released the unit will turn red indicating that it has remembered your distance.
Why is my Parking Sensor flashing yellow?
This is an indicator that the batteries need to be changed.
What is the difference between the Grey Sensor and the White Parking Sensor?
The main difference is the distance that is measured. The white Sensor measure 1 foot to 4 feet. While the Grey Sensor measures 6 inches to 6 feet. The Grey Sensor is also equipped with a walkway light. When purchasing, it will be based on the distance needed for your garage and/or aesthetic.
What kind of USB cable does the Parking Sensor need?
The USB cable is a basic micro-USB. This can be found where most cell phone chargers are sold or right here at STKR.
Where can I purchase Replacement Caps or Seals for the EZ Jugs?
Replacement pieces can be purchased on the STKR Concepts site under Accessories